An international group of scientists, including from the University of Cambridge, have developed a graphene composite that can ‘eat’ common atmospheric pollutants, and could be used as a coating on pavements or buildings.
Working in collaboration with the Italcementi HeidelbergCement Group and other partners, the Cambridge scientists developed a photocatalyst that degrades up to 70% more atmospheric nitrogen oxides (NOx) than standard titania nanoparticles in tests on real pollutants.
Atmospheric pollution is a growing problem, particularly in urban areas and in developing countries. According to the World Health Organization, one out of every nine deaths worldwide can be attributed to diseases caused by air pollution. Organic pollutants, such as nitrogen oxides and volatile compounds, are the main cause of this, and they are mostly emitted by vehicle exhausts and industry.
While researchers are developing new technologies and energy sources that will drastically reduce the volume of pollutants emitted into the atmosphere in the first place, they are also on the hunt for new ways to remove more pollutants from the atmosphere. Photocatalysts such as titania are one way to do this. When titania is exposed to sunlight, it degrades harmful nitrogen oxides and volatile organic compounds present at the surface, oxidising them into inert or harmless products.
Now, in a study published in the journal Nanoscale, the researchers demonstrated that a composite of titania and graphene – a two-dimensional form of carbon – has significantly more powerful photodegradation properties than bare titania.
Researchers from the Cambridge Graphene Centre prepared and tested the composite, confirming its ability to photocatalytically degrade pollutant molecules, then researchers at Italcementi applied the coating to concrete to investigate its potential for environmental remediation.
“We decided to couple graphene to the most-used photocatalyst, titania, to boost the photocatalytic action,” said co-author Marco Goisis from Italcementi. “Photocatalysis is one of the most powerful ways we have to depollute the environment because the process does not consume the photocatalysts. It is a reaction activated by solar light.”
By performing liquid-phase exfoliation of graphite – a process that creates graphene – in the presence of titania nanoparticles, using only water and atmospheric pressure, the scientists created the new graphene-titania nanocomposite.
They found that it passively removes pollutants from the air when coated on the surface of materials. If applied to concrete on the street or the walls of buildings, the harmless photodegradation products could be washed away by rain or wind, or manually cleaned off.
To measure the photodegradation effects, the team tested the new photocatalyst against NOx and recorded a 70% improvement in photocatalytic degradation of nitrogen oxides compared to standard titania. They also used rhodamine B as a model for volatile organic pollutants, as its molecular structure closely resembles those of pollutants emitted by vehicles, industry and agriculture. They found that 40% more rhodamine B was degraded by the graphene-titania composite than by titania alone, in water under UV irradiation.
“Coupling graphene to titania gave us excellent results in powder form – and it could be applied to different materials, of which concrete is a good example for the widespread use, helping us to achieve a healthier environment. It is low-maintenance and environmentally friendly, as it just requires the sun’s energy and no other input,” said Goisis.
But there are challenges to be addressed before this can be used on a commercial scale. Cheaper methods to mass-produce graphene are needed. Interactions between the catalyst and the host material need to be deepened as well as studies into the long-term stability of the photocatalyst in the outdoor environment.
Ultrafast transient absorption spectroscopy measurements revealed an electron transfer process from titania to the graphene flakes, decreasing the charge recombination rate and increasing the efficiency of reactive species photoproduction – meaning more pollutant molecules could be degraded.
Based on this concept, scientists are also working on another product – an electrically conductive graphene concrete composite, which was showcased at Mobile World Congress in February this year. When included as a layer in flooring, it releases heat when an electrical current is passed through it. This could be used to heat buildings or streets without using water from a tank or boiler. It could also be used to create self-sensing concrete, which could detect stress or strain in concrete structures and monitor for structural defects, providing warning signals if the structural integrity is close to failure.
“An ever-increasing number of companies recognise the potential for graphene in new and improved technologies,” said Professor Andrea Ferrari, Director of the Cambridge Graphene Centre and co-author on the current paper. “This work has demonstrated a clear application of graphene for the degradation of environmental pollutants. This can not only have commercial benefits but, more importantly, a cleaner and healthier environment.”
Gloria Guidetti et al. ‘Photocatalytic activity of exfoliated graphite-TiO2 nanocomposites.’ Nanoscale (2019). DOI: 10.1039/c9nr06760d
Adapted from a story by the Cambridge Graphene Centre
The text in this work is licensed under a Creative Commons Attribution 4.0 International License. Images, including our videos, are Copyright ©University of Cambridge and licensors/contributors as identified. All rights reserved. We make our image and video content available in a number of ways – as here, on our main website under its Terms and conditions, and on a range of channels including social media that permit your use and sharing of our content under their respective Terms.